6.06 Innovative photocurable formulations for AM applications in the production of ceramic tiles molds 

SPOKE DI RIFERIMENTO
SPOKE CORRELATI
PROJECT LEADER
Massimo Messori
DATA INIZIO
Gennaio 2023
DATA FINE
Dicembre 2024
PROPOSER
Politecnico di Torino
PARTNER COINVOLTI

SACMI Cooperativa Meccanici Imola Società Cooperativa 

6.06 Innovative photocurable formulations for AM applications in the production of ceramic tiles molds 

The main aim of the present project is to find photocurable liquid formulations suitable for the production of molds for ceramic tiles. More specifically, the goal is to have formulations that can be handled for digital manufacturing of molds. The use of DOD (drop on demand), with resins applied thanks to printing heads to produce 3D-structured surfaces, in fact, is a recent and strategic innovation in ceramic mold manufacturing. The advantages of this technology are very important:

  • a digitally produced mold allows the same graphic to be produced in different parts of the world, where it is needed, with reduced costs and time;
  • the process is easier to manage, taking also into account that the molds are changed frequently to maintain a constant and perfect aesthetic impression over time.

An open challenge, however, is given by the properties of the mold. Actually, the used mold material is relatively easy to be worn-out, due to the fact that ceramic powders (the material to be pressed by the mold) are very abrasive.
One of the main limitations of the actual DOD technology is related to the presence of a maximum viscosity limit of the resins in use. This aspect represents a strong limitation for a much wider selection of photocurable resins and related formulations having a higher potential in terms of abrasion resistance, hardness, etc.
In the present project, the use of printing heads and related accessories able to operate at high temperatures for the realization of a lab-scale prototype system for resin application will be the base for exploring the possibility to use resins and related formulations having a viscosity too high for the current state-of-the-art.
Resins with different chemical composition and reactivities will be evaluated as well as the possibility to incorporate inorganic fillers/particles for the improvement of the abrasion resistance.
The starting monomers and oligomers will be selected based on their rheological properties before curing, mechanical properties after cross-linking and their origin. When possible, monomers and oligomers obtainable from renewable resources will be considered for their impact on materials sustainability.
Process parameters (printing conditions such as deposition speed, UV-Vis source energy, etc.) will be investigated and optimized in order to control the resolution of the 3D-structured surface pattern, the adhesion to the substrate and the ultimate properties (abrasion resistance and other).

RISULTATI ATTESI

The expected results are summarized as follow from a scientific and technological point of view.

  • Realization of a bench-scale prototype system for the use of DOD technology at high temperature (from 50 up to 120°C).
  • Possibility to use (relatively) high viscosity photocurable resins and related formulations in DOD technology for the production of 3D-structured cross-linked polymers applied onto a metallic substrate (ceramic tiles mold).
  • Enhancement of the abrasion resistance of the resins with respect to the state-of-the-art.
  • Enhancement or maintenance of the resolution characteristics (dimensional tolerances) with respect to the state-of-the-art.
  • Replacement of fossil-based raw materials (monomers and oligomers) with chemicals obtainable by renewable resources.

Concerning other expected results with social and economic impact, in the case of positive results, the knowledge and the expertise developed by the young researcher (PhD student to be recruited) during the project could be the base for eventual entrepreneurship activities such as spinoff or startup companies.